Brand NEW Heavy Duty Mosfet Regulator
Don’t settle for an unreliable charging system!
2012-2018 RZR 900/1000 models are well known for repeated voltage regulator failures due to manufacturing quality issues and poor placement on the vehicle.
Fix and forget the problem with RMS Lab’s advanced technologies!
With increased demand for an alternative solution to subpar OEM parts and unproven manufacturer recalls we had our RMS Labs’ engineers tackle the problem.
They came up with a permanent solution to give Polaris RZR owners confidence in their vehicles once and for all.
This STAGE 2 Kit Includes:
Meets & exceeds Polaris RZR regulator recall Z-16-01-C specifications.
Improved heavy duty Polaris recommended voltage regulator housing
RMSTATOR renowned MOSFET regulation circuit for low operating temperature.
Plug & Ride Design
Automotive grade stock location wiring harness with OEM-quality heavy-duty connectors
1 year warranty
You might want to consider our other kits
RMS020-103775 - Ultimate Heavy Duty Mosfet Voltage Regulator Performance Upgrade STAGE 3 – Front Hood Relocation Kit
Significantly decreases internal operating temperature with highly efficient MOSFET transistor regulation circuit.
This technology runs much cooler than the OEM silicon rectifier regulation circuit and requires much less power to operate.
Automotive grade wiring harness with OEM-quality heavy-duty connectors
Made with the same Delphi connectors as OEM Polaris parts our wiring harnesses are manufactured in a factory with controlled quality processes.
They use the same Cross-Link braided copper wire as the OEM parts and resist heat oil acid gas and more with very low electrical resistance.
Plug & Ride design
Our voltage regulator housings are manufactured to OEM specifications for a fast and easy installation.
WARNING : This product is suitable for certain 2016-2017 models whose regulator connects directly to the main harness of the vehicle without conversion harness.
If you own a 2016 RZR 1000 or any other RZR from a year prior to 2016 you must use a conversion harness to install this regulator.
Used on the following applications:
POLARIS
ACE 500 (2017-2018)
ACE570 EFI (2017-2018)
ACE 570 EFI Euro (2017-2018)
ACE 900 (2017-2018)
Scrambler Tractor1000 (2018)
Scrambler 1000 XP Euro (2017-2018)
Scrambler 1000XP (2017-2018)
Scrambler 850 (2017-2018)
Sportsman 850 (2017-2018)
Sportsman ACE (2017)
Sportsman 850 (2017-2018)
Sportsman 1000 (2017-2018)
RZR 1000 (2014-2018)
RZR 4 1000 (2014-2018)
RZR 4 900 (2015-2017)
General (2016-2018)
Ranger 500/570/900/100 (2014-2018)
Replaces these genuine manufacturers part numbers:
POLARIS
2206367
4013247
4013904
4014029
4014856
4015229
4016868
RZR 900 XP 2013-2014
RZR XP 1000 2014-2016
OEM: 2206367
Upgrade Kit : RMS020-103793
Relocation Kit : RMS020-103775
RZR 900 2015 RZR 900 XC
RZR 900 S RZR 4 900
OEM: 2206620 2206473
Upgrade Kit : RMS020-103771
Relocation Kit : RMS020-103779
Battery condition is important. No regulator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY !
Important notice: This product is a direct aftermarket replacement to Polaris Recall Z-16-01-C (OEM # 2206620 2206367 2206473) includes a conversion harness to allow a worry free connection to older models main harness.
However for some 2016-2017 RZR models the regulator connects directly to the main harness without the need for a conversion harness. If you need the regulator only please purchase the part number RM30421
| Type | Vehicle Ignition Parts |
|---|---|
| Part | MOSFET Regulator Rectifier For Polaris RZR 900/1000 ACE Sportsman Scrambler |
| OEM/Part No. | RMS020-103793 |
